Thursday, March 3, 2016

1100 series phone configuration files for asterisk

Now that your phones have the SIP firmware on them, you'll need to get them to load their configuration file that they will need to talk to asterisk.


Note the MAC address of your phone.  Create a file in your TFTP directory that is SIPmacaddress.cfg.  Inside that file, put in the information below, swapping in your Server IP, extension number and password.  The items that need your specific input are in BOLD. 

NOTE:  If your asterisk implementation utilizes PJSIP, change the server_port1_1 5060 port to 5061

Once you have put this information in below, save the file.  Reboot the phone.

DNS_DOMAIN asterisk.local
SIP_DOMAIN1 asterisk.local
SERVER_IP1_1 X.X.X.X
SERVER_PORT1_1 5060
SERVER_RETRIES1 3
DEF_USER1 ASTERISK

FORCE_BANNER YES
BANNER TechSupport
AUTOLOGIN_ENABLE USE_AUTOLOGIN_ID
PROMPT_AUTHNAME_ENABLE NO
AUTOLOGIN_ID_KEY01 1006@asterisk.local
AUTOLOGIN_AUTHID_KEY01 1006
AUTOLOGIN_PASSWD_KEY01 YourExtensionPassword

###add more extensions to buttons alter the lines below##
###you can have up to 6 different extensions.####

#AUTOLOGIN_ID_KEY02 YYYY@asterisk.local
#AUTOLOGIN_AUTHID_KEY02 EXTENSION
#AUTOLOGIN_PASSWD_KEY02 PASSWORD

VMAIL *97
VMAIL_DELAY 300
MAX_APPEARANCE 1
DEF_LANG English
DEF_AUDIO_QUALITY High
LLDP_ENABLE YES
ADMIN_PASSWORD 26567*738
ADMIN_PASSWORD_EXPIRY 0
DEF_AUDIO_QUALITY High

# Settings below disable extended AVAYA license features that prevent login
# if you don't have a proper license server
MAX_LOGINS 1
USB_HEADSET LOCK
EXP_MODULE_ENABLE NO
ENABLE_SERVICE_PACKAGE NO
IM_MODE DISABLED
AVAYA_AUTOMATIC_QoS NO
VQMON_PUBLISH NO
SIP_TLS_PORT 0
ENABLE_BT NO






6 comments:

  1. Thank you for this awesome how-to!It was really helpful.

    In my case I had to change all the with

    ReplyDelete
    Replies
    1. My message not displayed fully!
      So check below.
      In my case I had to change all asterisk.local the with PBX-server-IP

      Delete
  2. TYPO:

    "ENABLE_LLDP" keyword is wrong, the correct one is "LLDP_ENABLE"

    ReplyDelete
  3. TYPO: MAX_APPEARANCES is without the final "S" : MAX_APPEARANCE

    ReplyDelete

Feel free to leave a comment! If you have any information that you think should be included, please do so here and I'll get it added in.